Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Ken T on 02 August 2009, 20:51:16

Title: hot water feed for LPG
Post by: Ken T on 02 August 2009, 20:51:16

I have finally started fitting my LPG system to my 2.2i. The stuff's been sitting in the garage for 2 years, so its about time to get started  ;D

Anyone know where to get the hot water feed for the vapouriser ?

Ken

Title: Re: hot water feed for LPG
Post by: Lazydocker on 02 August 2009, 21:06:50

Don't know for certain on a 4 pot but... All of us have found (on the V6) it's best to interrupt the feed to the HBV, run through the Vaporiser and return into the  HBV instead of teeing as you're guaranteed a good flow rate.

Title: Re: hot water feed for LPG
Post by: Ken T on 02 August 2009, 21:16:21

Thanks for that, now all I got to do is find the HBV !.

Cheers Ken

Title: Re: hot water feed for LPG
Post by: Kevin Wood on 02 August 2009, 23:32:28

Quote

Don't know for certain on a 4 pot but... All of us have found (on the V6) it's best to interrupt the feed to the HBV, run through the Vaporiser and return into the  HBV instead of teeing as you're guaranteed a good flow rate.

Exactly what we did on Marie's 4 pot. :y

Interrupt the hose from the rear of the head to the HBV (the single connection on one side of the HBV) and divert via the vapouriser.

Kevin