Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: samrey4u on 11 August 2009, 19:06:52

Title: cambelt posr
Post by: samrey4u on 11 August 2009, 19:06:52

 Facelift 2.5v6 x25xe engine , how many teeth does cambelt have 225 ? :-/

Title: Re: cambelt posr
Post by: RobG on 11 August 2009, 19:13:05

Quote

Facelift 2.5v6 x25xe engine , how many teeth does cambelt have 225 ? :-/

Yep, and 30mm wide

Title: Re: cambelt posr
Post by: samrey4u on 11 August 2009, 19:14:56

thanks rob mate did my cambelt and tensioners today and its running badly but timed perfectly checked it 3 times :'(

Title: Re: cambelt posr
Post by: GastronomicKleptomaniac on 11 August 2009, 19:22:13

Quote

thanks rob mate did my cambelt and tensioners today and its running badly but timed perfectly checked it 3 times :'(

 Have you reconnected every last little pipe and plug?

Title: Re: cambelt posr
Post by: RobG on 11 August 2009, 19:23:38

All connectors plugged in tight, any codes, any vac pipes adrift :question

Beat me to it Pete :P :P

Title: Re: cambelt posr
Post by: samrey4u on 11 August 2009, 19:31:24

Quote

All connectors plugged in tight, any codes, any vac pipes adrift :question

Beat me to it Pete :P :P

will have another check tomorrow as i suspect a breather adrift somewhere as its idling very slow :'( the 4 that go into back of plenum are connected but have a 5th cant see where it goes  :'(

Title: Re: cambelt posr
Post by: JamesV6CDX on 11 August 2009, 19:33:35

Quote

have a 5th cant see where it goes  :'(

Might be the autobox breather?

Nothing like a bit of ATF in the inlet  ;D

Title: Re: cambelt posr
Post by: samrey4u on 11 August 2009, 19:35:49

Quote

Quote

have a 5th cant see where it goes  :'(

Might be the autobox breather?

Nothing like a bit of ATF in the inlet  ;D

5th one isnt connected so cant have atf in inlet surely  :'(

Title: Re: cambelt posr
Post by: JamesV6CDX on 11 August 2009, 19:39:58

One of the pipes at the back of the engine goes to the back of the auto box - it's the auto box breather, and doesn't connect to anything :y

(My comment about ATF in inlet was  in jest :y )

Title: Re: cambelt posr
Post by: Elite Pete on 11 August 2009, 19:42:55

Are you sure its the breathers that have been connected and not the gearbox breather, it looks similar ::)

Title: Re: cambelt posr
Post by: samrey4u on 11 August 2009, 19:44:26

Quote

One of the pipes at the back of the engine goes to the back of the auto box - it's the auto box breather, and doesn't connect to anything :y

(My comment about ATF in inlet was  in jest :y )

so as i look at engine the pipe points toward pass/side of vehicle ,behind plenum obviously ?

Title: Re: cambelt posr
Post by: samrey4u on 11 August 2009, 19:46:36

Quote

Are you sure its the breathers that have been connected and not the gearbox breather, it looks similar ::)

Will check tomorrow pete many thanks  :y