Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: NiallyV6CDX on 23 August 2009, 21:16:54

Title: Window switch removal
Post by: NiallyV6CDX on 23 August 2009, 21:16:54

Hi, my passenger side window switch is playing up and I need to remove it, only the haynes manual is so vague, it just says "prize it out carfully"...I dont want to risk damaging the centre console. Any advice on how to do it properly?
Regards to all :)

Title: Re: Window switch removal
Post by: KillerWatt on 23 August 2009, 21:42:08

A small (less than 3mm in width) terminal screwdriver is what you want, and as the Haynes says...prise it out carefully if you don't want to damage the surrounding plastic.

Title: Re: Window switch removal
Post by: GastronomicKleptomaniac on 23 August 2009, 21:42:52

Yep. Put a cloth under the blade and gently move around the switch :y

Title: Re: Window switch removal
Post by: NiallyV6CDX on 23 August 2009, 21:44:03

Quote

Yep. Put a cloth under the blade and gently move around the switch :y

Ahh good idea. will give that a go. :)