Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: The Red Baron on 28 August 2009, 07:15:19

Title: changing abs sensor
Post by: The Red Baron on 28 August 2009, 07:15:19

as above, after replacing do the warning lights go out on there own or will the codes need clearing with tech 2.  :y

Title: Re: changing abs sensor
Post by: sharky on 28 August 2009, 11:39:44

Quote

as above, after replacing do the warning lights go out on there own or will the codes need clearing with tech 2.  :y

I had similar problem, thought it was sensors as ABS + T/C lights were on, tried a front and rear sensor and cleaned others but to no avail, turned out to be the ABS ecu, signs are no speedo, heavier steering and obviously no ABS or T/C, do you have these symtems??

Title: Re: changing abs sensor
Post by: The Red Baron on 28 August 2009, 13:15:51

Quote

Quote

as above, after replacing do the warning lights go out on there own or will the codes need clearing with tech 2.  :y

I had similar problem, thought it was sensors as ABS + T/C lights were on, tried a front and rear sensor and cleaned others but to no avail, turned out to be the ABS ecu, signs are no speedo, heavier steering and obviously no ABS or T/C, do you have these symtems??

ecu is new, has been tech 2`d & is o/s/f sensor.  :)