Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: footloose on 27 August 2009, 17:03:36

Title: Auto box selector swich removal
Post by: footloose on 27 August 2009, 17:03:36

I am about to change my auto gearbox selector swich.
Hains says drop the rear of the gearbox. Do i realy have to? If anyone has an easier way, please advise. :-/ :-/ :-/

Title: Re: Auto box selector swich removal
Post by: razzo on 27 August 2009, 22:26:48

No mate you don't have to drop the box. Undo nut on selector shaft & remove two 10mm bolts then disconnect multi plug, do this when engine is cold as the switch sits very close to the cat

Title: Re: Auto box selector swich removal
Post by: albitz on 27 August 2009, 22:44:59

I changed mine today,did it how Raz said,its a bit awkward but do-able.A 10mm ratchet spanner makes life easier for the bolt towards the front (which isnt visible btw). :y

Title: Re: Auto box selector swich removal
Post by: footloose on 28 August 2009, 10:39:59

Thanks chaps. What a relief. Iv'e had a look and i can see the connector and feel the bolts. a bit of a squeeze but i'll do it today.

Title: Re: Auto box selector swich removal
Post by: footloose on 29 August 2009, 20:03:21

All done works a treat.
Thaanks for advice. :) :)