Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Turk on 29 August 2009, 01:11:41
-
Does anyone have images, diagrams or instructions on how the injection pipes run from the pump to the injectors ?
I've re-fitted my re-con'd pump, but this time I've lost track of how the pipes interlink. They're still on the injectors, but have been slackened off to allow the loose pump ends to pivot out of the way whilst re-fitting the pump.
Last time they went back ok, but this time I've somehow got them mixed up. :-[
-
These are how they connect, as viewed from front of car:
Injectors
o1 o2 o3 o4 o5 o6
Pump
1 o o 5
4 o o 3
2 o o 6
-
Check your 'in box' dear chap!
-
Check your 'in box' dear chap!
:y Will do. In work at the mo'. Back in Turksville around 4:30
-
Yet again, Lord Maesteg delivers. :y
-
Yet again, Lord Maesteg delivers. :y
A pleasure mate - and don't forget to securely refit ALL the pipe clamps too!!!!
-
Yet again, Lord Maesteg delivers. :y
A pleasure mate - and don't forget to securely refit ALL the pipe clamps too!!!!
Ah, there may be a slight problem. There aren't any. ::)
The techie that serviced the pump said someone had fiddled with it previously. There were no plastic clamps fitted since I've had the car.
Anyhoo, job done. Starts on the button and drives nice. Now then, where did I put that chip ? :y
-
Yet again, Lord Maesteg delivers. :y
A pleasure mate - and don't forget to securely refit ALL the pipe clamps too!!!!
Ah, there may be a slight problem. There aren't any. ::)
The techie that serviced the pump said someone had fiddled with it previously. There were no plastic clamps fitted since I've had the car.
Anyhoo, job done. Starts on the button and drives nice. Now then, where did I put that chip ? :y
Right 'en butt, you'll need to source and fit a set of pipe clamps pronto!
I've never known injector pipes last long without them - bitter past experiences mate!
-
I'll have a hunt around my mates breakers yard. :y