Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: philglasgow on 14 September 2009, 10:38:22

Title: 2.5 td check oil message
Post by: philglasgow on 14 September 2009, 10:38:22

Guys

I did an oil changer yesterday like i do every  4k  but now i get check oil  message virtually all the time . The dipstick is sitting just under the full mark, would i be right in thinking there is a sensor that monitors this thats maybe got dirty or something?


Thanks

Phil

Title: Re: 2.5 td check oil message
Post by: Andy B on 14 September 2009, 10:41:43

I've never seen the diseasal level sensor, but if it's anything like the V6 where the wires sit in oil, then it could be that the wires have become so brittle that one or both have parted company with the switch. I'd to do a bit of re-soldering when i disturbed mine when i replaced the lower sump pan.

Title: Re: 2.5 td check oil message
Post by: philglasgow on 14 September 2009, 11:01:45

thanks for the reply Andy, I will just ignore the check message and check once a week , im not into sump off just for that.

cheers


Phil

Title: Re: 2.5 td check oil message
Post by: Andy B on 14 September 2009, 11:05:39

Quote

thanks for the reply Andy, I will just ignore the check message and check once a week , im not into sump off just for that.

cheers


Phil

It's a sump off job on theTD then is it? The Senator 24v  had its level switch on the side of the sump, easily replaced.

Title: Re: 2.5 td check oil message
Post by: philglasgow on 14 September 2009, 13:46:26

Quote

Quote

thanks for the reply Andy, I will just ignore the check message and check once a week , im not into sump off just for that.

cheers


Phil

It's a sump off job on theTD then is it? The Senator 24v  had its level switch on the side of the sump, easily replaced.

:-[

sorry I misread your quote earlier.


wasnt full awake . i will check were you said