Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: shay oneill on 23 September 2009, 15:53:02
-
hi does any1 no wer i could get a clutch bleeder nipple as ive snaped mine in half inside the housing
-
i have 1 here but they dont cost alot think mine cost 50p, standard nipple. most motor spares have them. :y :y :y :y :y
-
hi does any1 no wer i could get a clutch bleeder nipple as ive snaped mine in half inside the housing
I think you have more of a problem getting the old nipple out rather than getting a new one. :( :( :( ;)
-
u can get it undun with extractor they dont cost alot, :y :y :y
-
u can get it undun with extractor they dont cost alot, :y :y :y
So ... the hex head wasn't enough to remove the nipple, but an Eazyout will be ....... :-/ :-/ :-/. Depends how rusted in it is. ;) ;) ;)
-
you must of had an old 1 mine is stainless steal, and old 1 was alumium they do snap off but easy to get out :y :y :y
-
you must of had an old 1 mine is stainless steal, and old 1 was alumium they do snap off but easy to get out :y :y :y
I was just talking about nipples & easyouts in general ooooer! ::) ::) My Omega doesn't have need of clutch slaves etc having the optimum number of pedals already! :y :y :y
-
problemm is ive totaled the nipple housing to and need a replacement and dont no wer to get 1
-
looks like you will be needing a scap yard then and get a second hand 1. :(
-
what would the proper name for it b??
-
haveyou damaged the housing, or is it the niple thred?
-
both :-[
-
looks like u dun a good un, u will need to get a second hand gear box housing, if not good at mec better get a hole 1 and just swop it over, easy to swop over not like frunt drive, or just had a thourght, remove the gearbox housing, im sure if u take it off and remove the slave think its fixed inside and change the slave that should fix it :y :y
-
looks like u you dun done a good un, u will need to get a second hand gear box housing, if not good at mec better get a hole 1 and just swop it over, easy to swop over not like frunt front drive, or just had a thourght, remove the gearbox housing, im sure if u take it off and remove the slave think its fixed inside and change the slave that should fix it :y :y
etc etc
Rusty
I don't mean to be awkward but ........ your posts are bloody difficult to read. Have a go at leaving the 't xt spk' for your phone and run it through a spell checker of some kind. ;) ;) ;) :y :y
-
sorry im dislacsick, and spell cheak dont work here.
-
sorry im dislacsick, and spell cheak dont work here.
I believe there are ways & means.
U is spelt you for a start ........ :y
an why is dyslexic such a difficult word to spell? ;) ;)
-
i do a lot of tex'in, and its so we cannot spell it, somtimes i spell usa words, primiry school bugerd me up i.e 2+2=5 etc. plus wife in bed lol :y
-
OK THANKS IL TRY THAT :D
-
ok m8 let us know how it gose. :y :y