Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: amba on 15 October 2009, 09:24:07

Title: Brake hose crush washers
Post by: amba on 15 October 2009, 09:24:07

Whilst in the process of a brake rebuild I found that both the copper crush washers from the front flexy brake hoses had seen better days.
Are they a specific size to VX or can I just get normal copper washers from local factors ?

Title: Re: Brake hose crush washers
Post by: dbug on 15 October 2009, 09:26:10

Usually standard sizes mate so available anywhere.  Heat your old ones up with a blowtorch then reuse.

Title: Re: Brake hose crush washers
Post by: amba on 15 October 2009, 09:30:30

Thanks..dbug...are they 11mm for both back and front as expect I should replace the backs when I get there .