Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tigers_gonads on 17 October 2009, 19:58:07
-
as some of you will know, i have just fitted a 3 ltr v6 in my 2.5 estate.
engine went in ( eventualy)
fired it up this afternoon
ok ( ish ) its running very tappity
did not rev it !!
let it run sat on the ramp for 20 mins
warmed up ............ some noise from bottom and top ( tappity)
turned it off and started to bleed the clutch of air.
had some trouble getting the air out ( no pedel )
after 5 mins of pumping, lowered the ramp and decieded to fire it up again.
car refused to fire >:(
put it on a snap on solus test box ............. came back code 31 ( crank sensor )
so ............. i removed a known good sensor off my old 2.5 v6 ..............
fitted it ................ still no spark >:(
it turns over and sometimes it nearly fires but seems to be blowing back through the inlet >:(
i can't take anymore of the sh*t
some of you will know my job / financial situation so some of you will know how desparate i am at the moment :'(
can anybody give me some good news :question
-
as some of you will know, i have just fitted a 3 ltr v6 in my 2.5 estate.
engine went in ( eventualy)
fired it up this afternoon
ok ( ish ) its running very tappity
did not rev it !!
let it run sat on the ramp for 20 mins
warmed up ............ some noise from bottom and top ( tappity)
turned it off and started to bleed the clutch of air.
had some trouble getting the air out ( no pedel )
after 5 mins of pumping, lowered the ramp and decieded to fire it up again.
car refused to fire >:(
put it on a snap on solus test box ............. came back code 31 ( crank sensor )
so ............. i removed a known good sensor off my old 2.5 v6 ..............
fitted it ................ still no spark >:(
it turns over and sometimes it nearly fires but seems to be blowing back through the inlet >:(
i can't take anymore of the sh*t
some of you will know my job / financial situation so some of you will know how desparate i am at the moment :'(
can anybody give me some good news :question
31 isn't crank sensor, you get 31 if the engine isn't running.
-
Have you removed any of the plug leads?
-
as some of you will know, i have just fitted a 3 ltr v6 in my 2.5 estate.
engine went in ( eventualy)
fired it up this afternoon
ok ( ish ) its running very tappity
did not rev it !!
let it run sat on the ramp for 20 mins
warmed up ............ some noise from bottom and top ( tappity)
turned it off and started to bleed the clutch of air.
had some trouble getting the air out ( no pedel )
after 5 mins of pumping, lowered the ramp and decieded to fire it up again.
car refused to fire >:(
put it on a snap on solus test box ............. came back code 31 ( crank sensor )
so ............. i removed a known good sensor off my old 2.5 v6 ..............
fitted it ................ still no spark >:(
it turns over and sometimes it nearly fires but seems to be blowing back through the inlet >:(
i can't take anymore of the sh*t
some of you will know my job / financial situation so some of you will know how desparate i am at the moment :'(
can anybody give me some good news :question
Is this the one you bought of Markie Mark? give him a ring mate and ask him, would not think he would sell you a duff engine..
Code 31 will come up if you have put on the code reader when the engine is not running. Crank sensor is Code 19
-
sorry ............ my mistake
it came up no rpm signal
-
as some of you will know, i have just fitted a 3 ltr v6 in my 2.5 estate.
engine went in ( eventualy)
fired it up this afternoon
ok ( ish ) its running very tappity
did not rev it !!
let it run sat on the ramp for 20 mins
warmed up ............ some noise from bottom and top ( tappity)
turned it off and started to bleed the clutch of air.
had some trouble getting the air out ( no pedel )
after 5 mins of pumping, lowered the ramp and decieded to fire it up again.
car refused to fire >:(
put it on a snap on solus test box ............. came back code 31 ( crank sensor )
so ............. i removed a known good sensor off my old 2.5 v6 ..............
fitted it ................ still no spark >:(
it turns over and sometimes it nearly fires but seems to be blowing back through the inlet >:(
i can't take anymore of the sh*t
some of you will know my job / financial situation so some of you will know how desparate i am at the moment :'(
can anybody give me some good news :question
Is this the one you bought of Markie Mark? give him a ring mate and ask him, would not think he would sell you a duff engine..
Code 31 will come up if you have put on the code reader when the engine is not running. Crank sensor is Code 19
pm sent
-
19 is crank sensor, 31 is no rpm signal (always get this when the engine is not running)
-
Have you removed any of the plug leads?
no ............ nothing else has been touched since replaceing the crank sensor other then turning the key
-
Stupid question Steve,
But if its up on ramps, is the oil takeup pipe able to take oild from the sump to pump around the engine - tappets espcially?
Just a thought ............ :-/
-
while it was running ....... there was some squeeling from to utility belt but i put that down to damp on it .
had a small water leak ( loose pipe )
the block did'nt run anyway near dry
-
Stupid question Steve,
But if its up on ramps, is the oil takeup pipe able to take oild from the sump to pump around the engine - tappets espcially?
Just a thought ............ :-/
i think so ........... as it warmed up it was starting to quiet down
-
right lads ............ i know this is in the wrong place but i need to get word out fast :y
i have 2 2.5 v6's with all the bits on and a 2.5 td estate with most of the bits left :y
need to raise cash now so .............
anyone need anything pm me with v serious offers
cheers steve
-
carrying on from above
i'm a electrician ( or was ............ just lost my bussines ........... on the dole and going bankrupt )
i havent a clue what any of these bits are worth ( thats why i havent broke it up / head up arse and all that )
i hope people don't take this the wrong way but
in the spirit of oof im going to ask people to name there ( fair ) price for any bits
thanks lads steve