Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: skrba on 28 October 2009, 00:57:50

Title: Oil problem??
Post by: skrba on 28 October 2009, 00:57:50

Hi guys! I have a problem with my 2.0 16v.. (1997.)

When i start up the engine the oil lamp at control board is on until i pump the gas pedal and hit 2500-3000 rpm..

I 've recently changed cylinder head gasket, valves seals,  timing belt, and regular stuff.. (engine oil, oil filter auxililary belt )

Does anyone knows what should i do?

p.s. sorry for my bad english  ::)

Title: Re: Oil problem??
Post by: sneakypenguin on 28 October 2009, 01:29:49

try rechecking your oil levels, just in case you have a leak or didn't top it up enough

Title: Re: Oil problem??
Post by: skrba on 28 October 2009, 03:29:36

Level is ok... between min and max..

Oil pump maybe?

there was a leak... on camshaft seals.. but that is fixed..

Title: Re: Oil problem??
Post by: ENFIELD_MV6 on 28 October 2009, 09:00:55

possible oil level switch/pressure sensor failed or blocked

Title: Re: Oil problem??
Post by: Gaffers on 28 October 2009, 10:22:43

or a blocked strainer, the recent work may have dislodged some crud which could have found it's way to the sump