Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: strongbowman on 28 October 2009, 18:31:34

Title: vacume pipe on heater bypass valve 2.2-2003
Post by: strongbowman on 28 October 2009, 18:31:34

Hi to all, this is my first ever question .
My Omega 2.2 /2003 heater bypass valve has a vacume pipe fitted to the top  (3mm) ish and it is about 10 cm long and is just hanging loose my question is where does this pipe belong ? i have seen links on this site that makes it look like it should fit through the same area as th two main hot water pipes but the image shown is of a 2500  are the similar ? thanks very much for your time ...

Title: Re: vacume pipe on heater bypass valve 2.2-2003
Post by: RobG on 28 October 2009, 18:49:19

Quote

Hi to all, this is my first ever question .
My Omega 2.2 /2003 heater bypass valve has a vacume pipe fitted to the top  (3mm) ish and it is about 10 cm long and is just hanging loose my question is where does this pipe belong ? i have seen links on this site that makes it look like it should fit through the same area as th two main hot water pipes but the image shown is of a 2500  are the similar ? thanks very much for your time ...

That`s where it goes mate :y

Title: Re: vacume pipe on heater bypass valve 2.2-2003
Post by: TheBoy on 28 October 2009, 19:28:17

yup, goes through bulkhead to climate system.