Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bobk on 27 October 2009, 16:49:56
-
After a MOT fail on handbrake, I stripped the brakes down (1998 Omega Elite 3ltr Auto) and found the spring clip on the handbrake lever assembly was broken. Vauxhall main dealers don’t even show this on the system, just the two parts of the lever assembly. Has any one got a workaround for this part?(http://i406.photobucket.com/albums/pp147/rkeirle/Leverassembly.jpg)
-
can u not just get another lever from a scrap yard, should not cost more than £8, and only 10-15min to take off. and they all same. :y
-
Don't recall such a spring on mine - but then it was dark, and Mr DTM was doing most of the work, and left me to do the simple jobs like file down the pads ::)
-
I have a omega b saloon 2.5 V6 that I have decided to break will the handbreak fit off that, if so open to offers
-
Don't recall such a spring on mine - but then it was dark, and Mr DTM was doing most of the work, and left me to do the simple jobs like drink tea and eat choccy biscuits::)
Sounds about right. ;D
-
can u not just get another lever from a scrap yard, should not cost more than £8, and only 10-15min to take off. and they all same. :y
Its finding a scrappy local to me with an omega in stock. if any one with a spare lever assembly willing to post, Im willing to pay.
-
Its only purpose is to aid assembly.
-
there is one on the main line seen it when i was last on train blood huge place must be aleast a mile long had loads of cars in it, found out they use'd a part of it for the scrap heap challeng it is massive :y