Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Omegadoha, Desert Member on 08 November 2009, 03:48:41

Title: Possible oil level sensor failure again
Post by: Omegadoha, Desert Member on 08 November 2009, 03:48:41

I had my oil level sensor changed in March earlier this year. Yesterday the 'check oil level' warning came on. I checked the level of the oil and all the teeth on the dipstick were immersed in oil. Is it possible that the oil level sensor has failed again. The warning came on twice and was on briefly both times.

I think if I was genuinely low on oil the warning would stay on a lot longer. As a precaution I have bought some oil but am reluctnat to use it as I don't want to overload it.

Title: Re: Possible oil level sensor failure again
Post by: rustym95 on 08 November 2009, 04:51:32

had that like that before, would cheack the wire maybe cracked some were, I changed the hole plug and it stoped it. :y

Title: Re: Possible oil level sensor failure again
Post by: Kaycee on 08 November 2009, 07:38:55

would agree with rusty that sounds like a bad connection somewhere in that circuit

Title: Re: Possible oil level sensor failure again
Post by: hoj on 08 November 2009, 07:43:29

out of interest living where you do how much was the oil?

Title: Re: Possible oil level sensor failure again
Post by: Omegadoha, Desert Member on 08 November 2009, 08:42:57

Quote

out of interest living where you do how much was the oil?

It was QR 10 for a litre, which is about 1.66.