Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: amba on 09 November 2009, 12:25:06

Title: Dispack Removal
Post by: amba on 09 November 2009, 12:25:06

All bolts /cables are removed and dispack is now free at rear of engine,but I cannot get it out.
Do I need to remove the HBV and then withdraw it from drivers side or am I missing something.
Scuttle removed ,but plenum all still in place

Title: Re: Dispack Removal
Post by: Marks DTM Calib on 09 November 2009, 12:26:42

Easier with plenum off

Title: Re: Dispack Removal
Post by: amba on 09 November 2009, 12:30:04

Will it clear from drivers side if I remove the hbv though as I have drained coolant down as intened doing flush at same time.If it will clear through there would prefer as saves more stipping down.

Title: Re: Dispack Removal
Post by: amba on 09 November 2009, 14:21:47

Old dispack removed now,actually fairly straight forward especially with hbv removed.
Doesnt look to be any burn marks or splits so have ordered new genuine part for delivery Tuesday,but wont now get a chance to replace till wednesday due to work commitments,so lets hope that is the cause of the erractic running and misfiring...still puzzled why code 89 stored but expect due to fule not being fully burnt by non firing plug via dis...does that sound about right ?