Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Charlies Dad on 11 November 2009, 10:53:36

Title: heating ... need help fiding a thread
Post by: Charlies Dad on 11 November 2009, 10:53:36

i had put up a post about no heating in the mig, but cant go back in my previous posts to view it.

it had information on putting a hose into the matri to try and clear any possible blocks...does anyone know what the thread was called ?

Title: Re: heating ... need help fiding a thread
Post by: Jimbob on 11 November 2009, 11:08:24

been covered a few times.

in maint guides, there is how to remove quick release hoses.

put an off cut of hose on 1 pipe, ending under the car
real hosepipe to the other, and turn on for a few mins flush like hell,
then swap over and do it the other way.

reassemble and hope its helped, did for me.

Title: Re: heating ... need help fiding a thread
Post by: MickAP on 11 November 2009, 11:48:54

It's here, well I think it's the one you mean, read the whole thread.http://www.omegaowners.com/forum/YaBB.pl?num=1250531430/0

Mick

Title: Re: heating ... need help fiding a thread
Post by: Charlies Dad on 11 November 2009, 11:56:57

thanks i coulndt find it going to do it now... wish me luck, its fooking freezing (both in and out the car).

last question i take it that i will need to take the scutle board of to get to it ?

Title: Re: heating ... need help fiding a thread
Post by: Ghost on 11 November 2009, 12:32:02

It would make it a lot easyer to get to if you did.

Title: Re: heating ... need help fiding a thread
Post by: Charlies Dad on 11 November 2009, 13:30:39

Thanks very much .... we have heat mrs and kids will be happy now thanks for your help yet again,

Title: Re: heating ... need help fiding a thread
Post by: Jimbob on 11 November 2009, 17:10:52

glad it worked  :y