Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: geoff on 26 November 2009, 18:10:00

Title: handbrake adjustment
Post by: geoff on 26 November 2009, 18:10:00

adjust handbrake today did shoe adjustment then slack on cable god the adjust is a pig to get at, heat sheild off after eventually getting heat sheild off,with the exhaust pipes in the way and the propshaft what a nightmare,but all done now with a bit of swearing and a bit of time god a long time >:( >:( >:( :y :y :y :ygreased brake cables and brake pipes changed back brake padsand greased fuel lines where the metal pipe bits are :y :y :y

Title: Re: handbrake adjustment
Post by: The Red Baron on 26 November 2009, 18:33:53

sounds like a good job done. :y

Title: Re: handbrake adjustment
Post by: Welung666 on 26 November 2009, 18:57:01

I've never taken the heatshields off to tighten the cable adjuster! I use a 3/8" drive ratchet with 2 5" extensions, a knuckle and a deep socket ;) Easy peasy :y