Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kingycos2 on 29 November 2009, 19:57:00

Title: "longlife stainless backbox"
Post by: kingycos2 on 29 November 2009, 19:57:00

Been offered a stainless longlife back box for my 2002 3.2 elite, the back box has come of a 1999 3.0 elite, willit fit straight on to my elite?  ;)

Title: Re: "longlife stainless backbox"
Post by: hotel21 on 29 November 2009, 19:58:27

If both are saloons/estates then they should but depends on where the joins were made in the original stainless system - same place as original or an inch or three further back?  Centre sections might be short or over long otherwise...

Title: Re: "longlife stainless backbox"
Post by: rustym95 on 30 November 2009, 10:18:45

only long life on out side not inside., have 2 that look good but failed on mot, and a crome one as well.

Title: Re: "longlife stainless backbox"
Post by: alank46 on 30 November 2009, 13:52:59

Hi
What element of the MOT did they fail on? If stainless I assume they did not leak so why did they fail?
Alan

Quote

only long life on out side not inside., have 2 that look good but failed on mot, and a crome one as well.