Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: 4huftys on 01 December 2009, 13:09:35

Title: Fault code missfire
Post by: 4huftys on 01 December 2009, 13:09:35

With fault codes 0300 and 0302 random misfire and misfire on cyl no2 if you have changed plugs what else could cause this, is it possible that plug unit/pack is down.
if you have any air leaks or oxygen censor  down would this not show up as all cylinders misfiring.
The misfire is only at low range and revs cleanly.

Title: Re: Fault code missfire
Post by: Welung666 on 01 December 2009, 14:07:48

Pull the dis-pack and check the rubber boot for splits ;)