Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: batista on 23 October 2009, 19:37:36

Title: how do you clear stored codes.
Post by: batista on 23 October 2009, 19:37:36

i have codes 0700 saying transmission control system (MIL request) and a code 0727 saying engine speed input circuit no signal..now ive changed the camshaft sensor for a genuine vauxhall one cost of £75 from vauxhall,,but the eml stays on with these codes still there,,anyone know how to get rid of these codes,,would be most appreciated, :'(

Title: Re: how do you clear stored codes.
Post by: jonnycool on 23 October 2009, 19:54:42

One member on here reckoned that you could clear stored codes by turning the ignition on and off 25 to 30 times, the theory being that some codes get cleared after that many clean starts. Didn't work for me, but may be worth a try.

Other than that there are cheap code readers available on ebay that can clear codes. A mate cleared mine with a Volkswagen one. HTH

Title: Re: how do you clear stored codes.
Post by: Darth Loo-knee on 23 October 2009, 19:56:17

Quote

i have codes 0700 saying transmission control system (MIL request) and a code 0727 saying engine speed input circuit no signal..now ive changed the camshaft sensor for a genuine vauxhall one cost of £75 from vauxhall,,but the eml stays on with these codes still there,,anyone know how to get rid of these codes,,would be most appreciated, :'(

You could have a drive up here and I would clear them for you ;)

Title: Re: how do you clear stored codes.
Post by: Welung666 on 23 October 2009, 20:54:11

I can clear them to :y Probably a bit closer than DLK to (sorry Daz :y)

Title: Re: how do you clear stored codes.
Post by: Andy B on 23 October 2009, 21:03:59

I can't find both of these codes on the list.
I can find .....
P0700   MIL request from Transmission Control (TC) Modul
 but not 0720  :(

Anyway, isn't there stil afault on the car if the EML is still on. AFAIA it's only the airbag light that needs restting.  :-?  :y

Title: Re: how do you clear stored codes.
Post by: Darth Loo-knee on 23 October 2009, 21:06:35

Quote

I can clear them to :y Probably a bit closer than DLK to (sorry Daz :y)

No problem mate :y

Title: Re: how do you clear stored codes.
Post by: RobG on 23 October 2009, 21:46:08

Quote

i have codes 0700 saying transmission control system (MIL request) and a code 0727 saying engine speed input circuit no signal..now ive changed the camshaft sensor for a genuine vauxhall one cost of £75 from vauxhall,,but the eml stays on with these codes still there,,anyone know how to get rid of these codes,,would be most appreciated, :'(

Codes refer to the gearbox changing cam sensor won`t cure them. Any problems with the box operation :question

Title: Re: how do you clear stored codes.
Post by: batista on 24 October 2009, 17:50:54

thanks all for the replies,,managed to get to mates garage and he cleared the codes for me.now the eml is off.and the mig is better again(shes not poorly any more).once again thanks all :y

Title: Re: how do you clear stored codes.
Post by: cmacleod540 on 02 December 2009, 16:09:15

disconnect the battery for 15 minutes

Title: Re: how do you clear stored codes.
Post by: Marks DTM Calib on 02 December 2009, 16:18:46

Quote

disconnect the battery for 15 minutes

It dont work on any of the Omega ECU's....not sure thats worked since the days of the Cavs!