Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: duggs on 07 December 2009, 23:36:35

Title: Resuming Cruise.
Post by: duggs on 07 December 2009, 23:36:35

This puzzles me.  Why doesn't cruise always resume when you press the R button....in fact it rarely does.

Cruise works fine but after having touched the break or accelerater...cruise doesn't always resume..

Why and under what circumstances does it not ?

Title: Re: Resuming Cruise.
Post by: Entwood on 07 December 2009, 23:38:13

I have the same problem ... and sometimes it doesn't "resume"  it sets a new speed.... and before anyone asks .. yes .. I'm pressing the right button !!!!  I've checked several times !!  :)

Title: Re: Resuming Cruise.
Post by: tunnie on 07 December 2009, 23:38:25

always does it for me without fail

Title: Re: Resuming Cruise.
Post by: tunnie on 07 December 2009, 23:39:05

should add i use it a LOT....

Title: Re: Resuming Cruise.
Post by: Kevin Wood on 07 December 2009, 23:45:54

I find you must tap the resume button. Press it for any longer than a tap and it sets the current speed. :y

Might well be different on a Simtec ECU.

Kevin

Title: Re: Resuming Cruise.
Post by: duggs on 07 December 2009, 23:53:57

A Tap !!  Ok will have a little play with it on the way to work in the morning.

Title: Re: Resuming Cruise.
Post by: MickAP on 08 December 2009, 00:02:41

Mines a relatively new stalk and it's needs a hardish tap to activate, but does work every time.

Mick

Title: Re: Resuming Cruise.
Post by: Stevie-blunder on 08 December 2009, 00:06:28

Mine works perfect  :y

Title: Re: Resuming Cruise.
Post by: feeutfo on 08 December 2009, 01:30:24

my 2.5 was a bit fussy. Put it down to the age of the stalk/car, (98).

My 3.2 is fine though.

Title: Re: Resuming Cruise.
Post by: Kaycee on 08 December 2009, 12:20:03

yes i had same prob it just needs a single tap to resume i too thought mine was nick nacked but was not