Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: devonkev on 15 December 2009, 22:10:39

Title: So I now have my fault codes, but what the next?
Post by: devonkev on 15 December 2009, 22:10:39

here is the original thread that I first asked about this problem
http://www.omegaowners.com/forum/YaBB.pl?num=1259780716/0

Here is the fault code info

"My Naff Code Reader" 081016 - PC based diagnostic tool


"My Naff Code Reader" - KW2000 Communication Window> 2001|Omega-B|Engine|Z 22 XE

Keyword #1: EF
Keyword #2: 8F
Normal timing parameter set.
systemSupplierSpecific: L       
VIN: W0L0VBM3511100794
vehicleManufacturerECUHardwareNumber 24426542 DG
systemSupplierECUHardwareNumber: SIE  0116004500
systemSupplierECUSoftwareNumber: 6586055131 
systemSupplierECUSoftwareVersionNumber: 0401
exhaustRegulationOrTypeApprovalNumber: S01003
systemNameOrEngineType:  Z22XE
RepairShopCodeOrTesterSerialNumber:  Not programmed
ProgrammingDate:  FFFFFFFF

Identifier: 1606

CalibrationDate: O108301C
CalibrationEquipmentSoftwareNumber: l2c8301a
ECUInstallationDate: 6586055204 
VehicleManufacturerSpecific: 3200


Total number of fault codes: 3

P0135 - O2 Sensor 1 Heater Open Circuit
 (04) - Present

P0030 - O2 Sensor Heater Circuit Range/Performance (Bank 1 Sensor 1)
 (08) - Present

P0130 - O2 Sensor 1 Open Circuit
 (04) - Not present


Would I be right thinking it could be the Lambda sensor failed?

many thanks

kev

Title: Re: So I now have my fault codes, but what the next?
Post by: rustym95 on 16 December 2009, 01:17:09

looks like you may have a loose wire or plug. could be lambda but would say wires first.