Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 31 December 2009, 21:18:14

Title: Cam Sensor location
Post by: Raymienets on 31 December 2009, 21:18:14

Sorry to be a pain but where is a cam sensor located on my 2.2 CD. A wee picture would be a great help as am not very up to date on miggys

Title: Re: Cam Sensor location
Post by: Welung666 on 31 December 2009, 21:22:37

Top of your engine, at the front edge of the ecotec strip. Lift it slightly at the back and slide it towards the windscreen then lift it off. The cam sensor is the plug right at the front of the engine under the strip.

To remove it, take the 2 x 10mm nuts off the cable tray at the front of the engine, then the 4 bolts holding the cambelt cover on and remove. Then just loosen the 1 torx bolt holding the cam sensor in place, gently pull the cable upwards and it'll slide out. Unplug the old one, plug the new one in and reverse the above :y

Title: Re: Cam Sensor location
Post by: Raymienets on 31 December 2009, 21:33:03

Many Thanks

Title: Re: Cam Sensor location
Post by: tunnie on 31 December 2009, 21:45:51

going from the bottom up, its the second circle...

(http://images.omegaowners.com/images/guides/4pot_cam_cover_gasket/DSC08389.jpg)

Title: Re: Cam Sensor location
Post by: Welung666 on 31 December 2009, 21:50:14

Thanks Tun, I couldn't find a pic hence 'war and peace' above :P

Title: Re: Cam Sensor location
Post by: Raymienets on 31 December 2009, 21:52:07

yes many thanks. makes it easier when you know where it is. cheers

Title: Re: Cam Sensor location
Post by: tunnie on 31 December 2009, 21:54:46

Quote

Thanks Tun, I couldn't find a pic hence 'war and peace' above :P

Nabbed from my 2.2 cam cover gasket guide  :)