Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: robson on 01 January 2010, 16:58:33

Title: Front Fascia
Post by: robson on 01 January 2010, 16:58:33

1996 v6 2.5 Omega saloon  Is it beyond a diy job to remove the front facia to gain access to the air circulation tunnels etc.

Title: Re: Front Fascia
Post by: dbug on 01 January 2010, 17:00:17

Nothings impossible mate - guess this will be a long and involved exercise tho'.

Whats the problem there may be an easier way of approaching it!

Title: Re: Front Fascia
Post by: robson on 01 January 2010, 18:10:35

The problem is that in replacing a blower speed controller I broke off the retaining clips on the duct where the controller fits I have thought about mastic or glue but wondered whether it was feasible to replace the blower duct

Title: Re: Front Fascia
Post by: Andy H on 01 January 2010, 18:18:49

If you do go ahead please take lots of photos & write a maintenance guide afterwards.

I got to know my last Omega pretty well inside and out but the dashboard still remains a bit of a mystery to me.