Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Tonka. on 03 January 2010, 12:46:55

Title: Heater Matrix Pipes
Post by: Tonka. on 03 January 2010, 12:46:55

The heater is only giving warm air.

The engine is coming up to temp 85/90 but the top matrix pipe is hot and the bottom one is only warm.

I am going to put some radiator cleaner into it and give it a good flush out.

Exactly how do you get the pipe connections off the matrix? Is there something to twist/turn/pull/push?  :y :y

Title: Re: Heater Matrix Pipes
Post by: Tonka. on 03 January 2010, 12:57:16

Done it, searched and found on OOF.  ;D :y :y

Title: Re: Heater Matrix Pipes
Post by: Abiton on 03 January 2010, 12:58:54

For heater hose removal: http://www.omegaowners.com/forum/YaBB.pl?num=1185891036

Bear in mind though, that the return pipe should be  somewhat cooler than the feed pipe.  (Assuming that you are trying to heat the cabin at the time).

Title: Re: Heater Matrix Pipes
Post by: Tonka. on 03 January 2010, 13:35:23

Thanks Abiton  :y :y

Title: Re: Heater Matrix Pipes
Post by: Tonka. on 03 January 2010, 15:35:50

All done. Both pipes nice and hot. Heater blowing hot air.  :y :y :y