Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Miggy24 on 08 January 2010, 22:18:43

Title: LINING UP CAMBELT
Post by: Miggy24 on 08 January 2010, 22:18:43

Evening all can anyone tell me how to line all the marks up for the cambelt on a 2.0 16v as i want to check if the belt has sliped a tooth

Title: Re: LINING UP CAMBELT
Post by: tunnie on 08 January 2010, 22:21:50

look at the cams, there are 2 little arrows, they should line up to groves in the metal plate in front of the cam cover. The locking tool for 4 pots is a £5 tool from any decent motor factor, also you don't need to shout when making a title!  :y

Title: Re: LINING UP CAMBELT
Post by: Miggy24 on 08 January 2010, 22:32:55

Thanks buddy.What is the tool i need look like so i can get one in the morning.

Title: Re: LINING UP CAMBELT
Post by: tunnie on 08 January 2010, 22:35:03

(http://di1.shopping.com/images/di/35/4a/4a/504568476c396d4f396e4e5930524452786377-149x149-0-0.jpg)

Title: Re: LINING UP CAMBELT
Post by: Miggy24 on 08 January 2010, 22:40:26

Nice one.Pop down to halfords in the morning and see if they got one  :y

Title: Re: LINING UP CAMBELT
Post by: tunnie on 08 January 2010, 22:43:25

i did say decent motor factors  ;D

Title: Re: LINING UP CAMBELT
Post by: Miggy24 on 08 January 2010, 22:47:16

haha if so i`ll try euro car parts or als etc