Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Miggy24 on 11 January 2010, 16:33:17
-
As so of you know iv been having probs getting my car to run so here is a vid of it but to be honest it sounds crap
http://s195.photobucket.com/albums/z24/biffaboy21/?action=view¤t=V110110_1448.flv
-
Doesnt sound very good :-/
-
Is that with new pump, tensioners and rollers?
If so, is belt rubbing anywhere?
-
As so of you know iv been having probs getting my car to run so here is a vid of it but to be honest it sounds crap
http://s195.photobucket.com/albums/z24/biffaboy21/?action=view¤t=V110110_1448.flv
Certainly doesn`t sound like big/little ends as in your other post
-
No the belt hasnt been do as thats all fine
-
No the belt hasnt been do as thats all fine
I would check the bearings on the tensioner, rollers, and water pump.
-
Could that make the car run poor ie poor power and hard to start when warm/hot
-
0340 code won`t help
-
Could that make the car run poor ie poor power and hard to start when warm/hot
Poor power yes, if its a tooth out on the cambelt, hard starting usually cam or crank sensors.
Check as mentioned cambelt area
-
If i cant find the prob out and get another lump would one from a vectra fit or are the diffent
-
If i cant find the prob out and get another lump would one from a vectra fit or are the diffent
Just go and check the belt, something is rubbing there, or its a failed tensioner / waterpump
-
If i cant find the prob out and get another lump would one from a vectra fit or are the diffent
before considering that - is the cam timing bang on. The noise does sound bearing to me, making me wonder about cambelt tensioner.
Does it make same noise with aux belt off (OK to run 2.2 without aux belt, as waterpump is cambelt driven)
-
What was that puff of blue smoke from the right side of engine? :-/
Mick
-
its not blue its white smoke coming from the cracked manifold
-
Tb yes i tryed it without the aux belt off and still making the same noise
-
Tb yes i tryed it without the aux belt off and still making the same noise
OK, whats it like with cambelt cover off?
-
Also, get yourself a camlock for that engine, reckon you're gonna need it.
-
It aint got a cam belt cover on it!
Check the timing......easy and quick to do
-
It aint got a cam belt cover on it!
Check the timing......easy and quick to do
Opps, my bad ;D
In my defense, I had nodded off since I viewed the vid :-[
-
iv checked the timing and it all seems bang on