Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: nordic on 12 January 2010, 20:14:26

Title: Windoe - 'One-shot' operation - not working
Post by: nordic on 12 January 2010, 20:14:26
The 'one shot' operation where you pull or push the switch for a second or two for the window to fully retract or lift up on its own has stopped working.

The switches all work if you keep your finger on them but the 'one shot' operation has stopped working on them all!

Any ideas?

Thanks,

Andy
Title: Re: Windoe - 'One-shot' operation - not working
Post by: Lazydocker on 12 January 2010, 20:16:17
Press and hold the up button with the window closed for about 5 seconds... You should hear it click :y

Had a flat battery lately? ::)
Title: Re: Windoe - 'One-shot' operation - not working
Post by: Welung666 on 12 January 2010, 20:16:26
Hold the button to close the window and hold it for a further 5 or 6 seconds after it's shut. Do that for each window and it should solve it :y
Title: Re: Windoe - 'One-shot' operation - not working
Post by: TheBoy on 12 January 2010, 20:19:28
if battery died recently, sunroof needs reset as well...
Title: Re: Windoe - 'One-shot' operation - not working
Post by: nordic on 12 January 2010, 20:25:40
Yes! - Battery was just replaced!

You lot are fantastic -and super quick! Thanks!

Will give it a go!

Cheers

Andy ;)
Title: Re: Windoe - 'One-shot' operation - not working
Post by: Lazydocker on 12 January 2010, 20:31:06
Quote
Yes! - Battery was just replaced!

You lot are fantastic -and super quick! Thanks!

Will give it a go!

Cheers

Andy ;)

As above... Sunroof will need resetting too but may be better leaving that until the weather improves ::)
Title: Re: Windoe - 'One-shot' operation - not working
Post by: Bionic on 13 January 2010, 06:22:44
Taking the battery off generally results in all of the associated electrics going to pot. You will probably have to do the Radio/CD, all of the windows and the sunroof too. The door locks might be ok. I did the Climate Control reboot too.
You can sit in the drivers seat and do it all from there, just look in you User Manual and use the data from you VX PassCard if needed for the codes.
GudLuk
Title: Re: Windoe - 'One-shot' operation - not working
Post by: nordic on 14 January 2010, 15:54:21
Thanks guys - You did it!

Problem solved!  ;D
Title: Re: Windoe - 'One-shot' operation - not working
Post by: sparkyw666. on 14 January 2010, 16:29:37
if only all problems was as easy to fix as this