Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Cliffo B on 01 January 2010, 17:12:24
-
Pulled away from traffic lights, and a drop in power, engine light flashed, then stopped,then a slow return to power. Just done pedal test and got trouble code 1700 reads "Service vehicle soon.Request from transmission module" Is this a warning to top up to level or an indication of something more serious?
-
check the autobox oil level...
-
The gearbox ecu detected a problem, thus went into limp-home.
Changing the atf is always a good idea
-
Already got this in hand Had some super advice from the members a week or so back. Now will be doing a fluid change next week for sure.Miggy's off the road now.As promised I'll let everone know how I get on. Just can't get my head round Migg'ys timeing :o :o
-
Hello all, finished miggy's autobox fluid change 3 days back,I finished up fitting a new filter,2 new gaskets,which I got from JPat at a good price. It took 6.5ltrs of Dexron6. It would seem there's a real bonus on the two times I've run miggy on local short runs, she's running smoother and much much quieter,I'll know better tomorrow as Ive got a 130mile round trip to do, weather allowing of course, thanks again :y :y
-
Hello all, finished miggy's autobox fluid change 3 days back,I finished up fitting a new filter,2 new gaskets,which I got from JPat at a good price. It took 6.5ltrs of Dexron6. It would seem there's a real bonus on the two times I've run miggy on local short runs, she's running smoother and much much quieter,I'll know better tomorrow as Ive got a 130mile round trip to do, weather allowing of course, thanks again :y :y
Congratulations mate, it's always nice when problems are solved quickly & cheaply :y
-
Sounds like a good job - well done :y :y
-
good to hear m8 :y
-
Done the run from Leeds to Flamborough then to Scarborough then back to Flamborough and returned to Leeds so a good test and miggys quieter and much smoother.I checked today and the T.C. is still present so possibly not out of the woods yet. :(Is it possible to remove it? or do I need to go to the local dealer to have it removed with Tech 2. :'( any advice would appreciated. :y
-
It is possible it will go out on its own after couple of days.
I think it takes some 20 turns of on and off before codes are cleared.
-
Hello,So it must be the same as my old Cav 2L 16v Ecotec that used the paperclip trick also,Ok thanks will hold back from the dealers for a week or two much healthier for miggy. :) Anyhow won't ever allow them near miggy without my presence. :y It's not a question of expence but trust, especially with a hand held computer. How do I know what buttons are being pressed and it would appear sometimes neither do they themselves :'( >:( Thats it rant over :y