Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: jaynemarie on 18 January 2010, 19:01:45

Title: heater matrix pipe
Post by: jaynemarie on 18 January 2010, 19:01:45

Bottom heater matrix pipe melted... can anyone tell me if you need a special tool to unclip the pipes plzz..

Title: Re: heater matrix pipe
Post by: Welung666 on 18 January 2010, 19:07:09

No special tool required. Press the clip on the top of the white ring and slide it towards the rubber part, you'll feel it go. Then you should be able to pull off the pipe with a good grip and a gentle twist.

Title: Re: heater matrix pipe
Post by: dbug on 18 January 2010, 21:52:41

Howto here - http://www.omegaowners.com/forum/YaBB.pl?num=1185891036

Title: Re: heater matrix pipe
Post by: jaynemarie on 19 January 2010, 10:09:49

I am so glad i found this site ... You guys are so helpful and I really appreciate it .. thank you  :y

Title: Re: heater matrix pipe
Post by: dbug on 19 January 2010, 12:56:30

No probs  ;)