Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bigboykarl on 20 January 2010, 23:44:41
-
now i have my cat sorted (thanks daz) need a coil pack now..i'm told there are 3 types is there any way to tell which one i've got without stripping it all down(eg.chassis no.) ...thanks
-
would think that there was only the one type but dif makes, as long as the same plug should work. bosh and siemens GM and siemens.
-
Take the scuttle off (takes 5 mins) and have a look. Generally you have a rectangular or oval connector for the 2.5/3.0. The 2.6/3.2s have a completely different setup but there is only one type as far as I am aware.
-
What year is your Omega?
-
now i have my cat sorted (thanks daz) need a coil pack now..i'm told there are 3 types is there any way to tell which one i've got without stripping it all down(eg.chassis no.) ...thanks
Coil Pack Karl? you have a mini facelift mate they have dispacks. If I remember rightly your car is a T reg in which case I would say you need the dispack with an Oval Connection.
This is the one I think you need Karl
http://cgi.ebay.co.uk/VAUXHALL-OMEGA-VECTRA-V6-IGNITION-COIL-PACK-OVAL-PLUG_W0QQitemZ300383682405QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item45f0433f65
I have bought myself one from this seller and he was very good & about £100 cheaper than Vauxhall.
Daz :y
-
There are indeed 3 different DIS packs used over the production life of the power palnt.
Early unit (mid 97 ish and earlier) had a verticaly mounted DIS pack with the connector on the side.
This was then replaced with a horizontaly mounted DIS pack with a rectangular connector
The final variant arrived around mid 98 and is also a horizontal unit but with an oval (ish) connector.
I would guess that yorus is, as LooKnee says, the later one
-
i just brought my dis this week mine is a mini face face lift on T plate and from what i could feel its the oval one i could feel and oval lip on it i hope it correct