Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: batmobile on 24 January 2010, 14:56:06
-
Looked through the forum but can't locate any pictures of the engine pulley layout with descriptions, or can anyone tell me what they are?
-
Looked through the forum but can't locate any pictures of the engine pulley layout with descriptions, or can anyone tell me what they are?
Have you looked in the maintainence section mate,surely there should be something in there. :y
-
..... or can anyone tell me what they are?
is there something specific you want to know? :-/
-
If I remember rightly (and I am sure someone will correct me if I am wrong) looking at the front of the engine you will find something like this very crude diagram I have just done
(http://i549.photobucket.com/albums/ii371/scottie7275/Pulleys.jpg)
-
yeah Andy, had the cambelt and tensioners changed, plus waterpump. But looking at front of engine top left small pulley is still original, should that have been changed as well?
-
Thats the aux belt tensioner. Shouldn't need to be changed but can become very dry and noisy so should be repacked with grease if necessary when cam belt done :y
-
yeah Andy, had the cambelt and tensioners changed, plus waterpump. But looking at front of engine top left small pulley is still original, should that have been changed as well?
As Scottie has said! :y :y :y
Remember that the belt you can see is the fan belt/auxillary belt, you have (hopefully ::)) had the belt & tensioners inside the plastic cover behind it replaced :y :y ;)
-
The aux belt is also refered to as the "serpentine" belt in various Vx publications.
Which engine and does it have air con ???
I'll try and lift a diagram for you .. :)
-
Y3.2SE with A/C
-
(http://img695.imageshack.us/img695/5061/snapa.jpg)
Bottom left for you and me then .. :)
HTH :)
-
OK, I give up, what is option G ?
I can't imagine what would be small enough to fit for a start ::)
-
G was an additional idler I believe ... certainly not on the previous 2.5 or this 3.2 .. :)