Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bumbazor on 29 January 2010, 09:40:56

Title: Sump gasket
Post by: Bumbazor on 29 January 2010, 09:40:56

Is it rubber or a sealant type? What's the part number?

Title: Re: Sump gasket
Post by: Andy B on 29 January 2010, 14:15:55

Quote

Is it rubber or a sealant type? What's the part number?

You mean the lower steel pan? I was supplied (sold) some grey goo sealent/gasket in short a mastic type tube when I did mine.

Title: Re: Sump gasket
Post by: Bumbazor on 29 January 2010, 14:25:11

Ah right ok I have some of that left over from doing my oil cooler. Must be high temp stuff that doesn't react with the oil.

Title: Re: Sump gasket
Post by: Andy B on 29 January 2010, 14:27:37

Quote

Ah right ok I have some of that left over from doing my oil cooler. Must be high temp stuff that doesn't react with the oil.

You'll have to check it's the same  :-/, I've never done an oil cooler.  :y