Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: des.allen on 30 January 2010, 18:53:45
-
Hi All,
Finally got round to doing breathers and checking plugs today, everything went well until i came to plug no.6, the rubber bit at the very end of the lead has snapped off and is still in the hole! I tried to scrape it out with a screwdriver but no joy.
As you are aware this plug is not the easiest to get to and was wondering if anybody has had this happen and what they did to remove it?
Thanks in advance Des :)
-
One of those 3 prong spring pick up thingy's might work ...
http://www.djsoundkit.co.uk/proddetail.php?prod=Y057F
HTH
-
Thanks for idea but i dont think i could get it to work in such a confined space.
The bit that has broken off is still around the nut part of the plug, as far as i could see so the 'arms' on this would have to go over the plug from the top.
Why oh why did it have to be this plug >:(