Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rajveer.sandhu on 02 February 2010, 12:57:35

Title: Vauxhall Vectra B Steering Wheel on Omega Facelift
Post by: rajveer.sandhu on 02 February 2010, 12:57:35

Hi, I have an irmscher Steering wheel from a Vectra B. It is a 3spoke wheel with a Silver finish to it.
Can I simply replace my existing Wheel on my Omega B Facelift with this one?
What else would I need to do?

Also there is a mod that allows the Traffic Master switch to be used as a Door Locking switch (Rather than pressing the door pins down manually). Has anyone got this link or info on this for the Omega Facelift (I did it for my Vectra B but are unsure whether it willstill work for the Omega Facelift).

The final question is, does anyone know where I can get the Full Omega Facelift irmscher bodykit from? I do not mind if its a replica so long as it looks like and Irmscher kit. Also will need the irmscher grill.

Title: Re: Vauxhall Vectra B Steering Wheel on Omega Facelift
Post by: Dany on 03 February 2010, 21:49:00

I'm looking for this body kit too! And it's impossible to find him... I remember that Rieger had a copy but it doesn't makes anymore! For the steering wheel, I'm not sure that you can mount it on your Facelift...

Title: Re: Vauxhall Vectra B Steering Wheel on Omega Facelift
Post by: Cliffo B on 03 February 2010, 22:28:00

It's likely as the irmscher wood effect steering wheel replicates for both vectra b and omega b. :y I know this as I got my steering wheel off a vectra b but the vectra air bag was slightly different, hope this info helps :y :y

Title: Re: Vauxhall Vectra B Steering Wheel on Omega Facelift
Post by: Agemo on 03 February 2010, 22:59:14

I had a Vectra wheel on my CDX for a year, perfectly acceptable. As for the TM switch, I don't think it would take the current, the wires are very thin compared to the ones on the c/locking. I suppose it is easy to check though, either that or just use a Beefier switch.