Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mr_elite on 04 February 2010, 16:18:04

Title: outside temp censor?
Post by: mr_elite on 04 February 2010, 16:18:04

hello again omega brothers your expertise is once again called upon?!?.... :-/

i'v fitted a brand new outside temp censor because the read out on the dash just reads f & c no numbers to say what the temp is??problem is after fitting it its still reading the same?? i'v checked the wire coming from the censor and that its a nice tight fit etc but still no read out??

thanx for your wisdom & guidence chaps(and the ladys) :y :y

cheers,,
wes,,

Title: Re: outside temp censor?
Post by: Millerboy on 04 February 2010, 16:42:43

I had this on mine. It turned out the wire had got trapped a few inches above the sensor and had cut through one of the wires, through connector and some heatshrink and it's good as new. Hope this helps :)

Title: Re: outside temp censor?
Post by: mr_elite on 04 February 2010, 17:46:02

nice 1 buddy.
i'll have a more thorough search of the wires once the weather permits

cheers mate :y :y