Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Lazydocker on 05 February 2010, 00:26:45

Title: Quick Inlet Manifold Question
Post by: Lazydocker on 05 February 2010, 00:26:45

Just a couple of quick questions about inlet manifolds...

Are all the v6 manifolds the same or, more importantly, is the 3.0 and 3.2 manifold the same?

Also, is the 2.0 and 2.2 inlet manifold the same?

Thanks

Title: Re: Quick Inlet Manifold Question
Post by: Bionic on 05 February 2010, 04:52:00

Not sure but I think you will find that they are probably not the same but some, according to some posts have been fitted by others for one reason or another.
My best advice would be for you to ring your local dealership and ask kindly for the part numbers of the different ones. You can then compare them. If you are looking for one there are plenty to be had from breakers and Ebay
GudLuk

Title: Re: Quick Inlet Manifold Question
Post by: Kevin Wood on 05 February 2010, 09:53:02

I believe the 3.2 has the same "30" in the casting as the 3.0, so likely the same.

Kevin

Title: Re: Quick Inlet Manifold Question
Post by: Lazydocker on 06 February 2010, 08:47:19

Quote

I believe the 3.2 has the same "30" in the casting as the 3.0, so likely the same.

Kevin

You know where the question is leading don't you ::) ::) I'm sure we looked 18 months or so ago and both 3 and 3.2 were the same :-/ :-/

Anyone know about the 2.0/2.2 manifolds for certain?