Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: aymen on 07 February 2010, 08:29:49
-
my 2.2 omega motor got out of order, so it was replaced by another used one in good condition, but alas, the temp. with the second motor is getting 97 at which point fans start with low speed and stop when temp gets 93, while with the old motor fans were starting as soon temp. got 91 degree and stop at 85. some times the temp rises to over 100
for your perusal and help.
-
was it same for same?
-
was it same for same?
hi,
yes, iit is the same its type is Z22X, 16 v. and only the motor block with dynamo were replaced;maybe the jet fuel injector was also replaced (but the radiator and all other equipments were not replaced )
-
Shows nicely how poorly calibrated the temp senders are....