Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: dave10 on 08 February 2010, 11:24:53

Title: vacume problem
Post by: dave10 on 08 February 2010, 11:24:53

hi all just been reading a thread about multi rams not working
it points out in mark-dtm :y that the vacume operates alot of things that are not working on my mv6
induction kit doesnt roar when in s mode and floor it,
heaters not very hot
heaters stuck on windscreen,
brakes need more presure on the pedal than normal,
lack of power than normal,
is there any one thing that could make all this happen
or could it be all seperate problems
cheers

Title: Re: vacume problem
Post by: Marks DTM Calib on 08 February 2010, 12:05:16

Check the brake servo pipe for damage/holes.....particularly on the passenger side just after it leves the plenum as if fitted incorrectly, it can rub against the aircon pipe.

Title: Re: vacume problem
Post by: TheBoy on 08 February 2010, 12:05:38

Vac leak sounds plausible.

Title: Re: vacume problem
Post by: TheBoy on 08 February 2010, 12:05:56

Beaten to it by Mr DTM ;D