Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Sir Popple on 08 February 2010, 15:09:15
-
Hi all, Ok this all started Saturday I have a miss fire so i replaced all spark plugs this did not fix the problem!! I have just done the paper clip test, but do not get any fault codes other than the 12 and 31. So i have now removed each spark plug cap to find that cylinder 1 is not firing. should this show up as a fault code if the DIS Cap is faulty? or could it just be the lead?
Thanks
-
Is it just 1 not firing? If so, HT leads. If a pair aren't firing, DIS pack (depending which 2)
older ECU doesn't have misfire detection, so won't raise a code for it
-
Hi, have only tried the drivers side as you know the issues at getting to the others, the other 2 on the drivers side are working fine
-
Hi, have only tried the drivers side as you know the issues at getting to the others, the other 2 on the drivers side are working fine
OK, you need to try all 6 :y
-
Thanks, i thought you would say that :(
-
Thanks, i thought you would say that :(
I like to be predictable :P
-
Never, just wish the nutter of an engineer that decided to root the wiring over the top of the spark plugs was within reach!!!!
-
Never, just wish the nutter of an engineer that decided to root the wiring over the top of the spark plugs was within reach!!!!
Wait til you have to replace the DIS. Then you will know what moaning/swearing/pain is all about ;D
-
THANKS, i can not wait!!!!! :-/
-
THANKS, i can not wait!!!!! :-/
Shame they banned child labour :-X
-
I know, and Muffin the Mule is now illegal so i an told, know anywhere i can get a set of leads and a dis cap at the right price from? going for a coffee to contemplate for a while :y
-
I know, and Muffin the Mule is now illegal so i an told, know anywhere i can get a set of leads and a dis cap at the right price from? going for a coffee to contemplate for a while :y
You need to find what it is first, and if the DIS Pack, which of the 3 types it is...