Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy H on 11 February 2010, 10:26:50

Title: Tech 2 - Cam timing?
Post by: Andy H on 11 February 2010, 10:26:50

Just curious

The ECU monitors the crank position sensor and the cam position sensor.

Is there any function in Tech 2 to tell you if the cam is where it should be in relation to the crank?

There is only one cam sensor so the results wouldn't tell you what the other 3 cams were doing but it might be a way of assessing how well the last cam belt change was set up.

Title: Re: Tech 2 - Cam timing?
Post by: Jimbob on 11 February 2010, 10:27:29

unfortunately not