Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: andy j cdx on 10 February 2010, 17:46:31
-
hi everyone ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx is engine no x25xe if so then which crank sensor of the above is the right one for my car any help clearing this up is v welcome thanks :y
-
Neither !!!!
2.2/2.6/3.2 will NOT fit the 2.5 !!! there are many crank sensors .. and you MUST have the right one
2.0 8v 90493864 £59.50 £53.56 £46.32
2.0 16v to 14194716 90458251 £59.50 £53.56 £46.32
2.0 16v from 14194717/31000001 9174621 £35.90 £32.36 £27.93
2.5 (early models) 90492006 £82.00 £73.80 £63.94
2.5 (later models) 90492061 £59.50 £53.56 £46.32
2.6/3.0/3.2 90540743 £53.50 £48.20 £41.47
2.0DTi/2.2DTi 90540188 £37.00 £33.30 £28.81
U25TD/X25TD 90487810 £85.50 £76.95 £66.79
You need to find out which of the 2.5 versions you have ... the difference is in the electrical plug at the top end under the scuttle
-
Does that imply the 3L ones are all the same then? ie 90540743
-
Does that imply the 3L ones are all the same then? ie 90540743
As far as I know ... yup .. :)
-
theres two crank sensors for the V6.
its simples oval plug or square plug.
early cars normally sq plug up to bout 1997 then its oval plug 1998 on.
-
theres two crank sensors for the V6.
its simples oval plug or square plug.
early cars normally sq plug up to bout 1997 then its oval plug 1998 on.
sort of correct ....
but only if you also add ... 2.5 V6
the sensor for the 2.6/3.0/3.2 V6 engines will NOT fit the 2.5 ...
-
the last engine swap i did was a 3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug.
-
hi everyone ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx is engine no x25xe if so then which crank sensor of the above is the right one for my car any help clearing this up is v welcome thanks :y
Yours will be 90492061 - thats an oval plug one and if you look underneath by the oil filter you should see black plastic end.
-
the last engine swap i did was a 3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug.
pulled a known good one of my old 2.5 and fitted it onto my 3.0 ( both oval plugs ) :y