Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: wightyboy2 on 21 February 2010, 22:28:38

Title: cutting out at junctions
Post by: wightyboy2 on 21 February 2010, 22:28:38

Hi , my omega has recently started cutting out when i stop at giveways etc , it seems to be more frequent once the car has been driven to temp then after i have turned the ignition off to go into a shop then come back it seems more prone to cut out on the second journey , could this be plugs and leads need changing ? any thoughts on this would be welcomed :-/ cheers

Title: Re: cutting out at junctions
Post by: feeutfo on 21 February 2010, 23:10:03

there is a guide re cleaning breathers and tick over valve for the 4pot in maintenance section.

Title: Re: cutting out at junctions
Post by: wightyboy2 on 22 February 2010, 12:06:06

Cheers chris thanks for your time will check it out hopefully get time at the weekend  :)

Title: Re: cutting out at junctions
Post by: ians on 22 February 2010, 12:15:22

Almost certainly the breather system as Chris' post.

Give it a good clean and it will go like a new car..