Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: ramsell001 on 10 March 2010, 21:19:29
-
Is their any way of opening the bonnet when the cable has brokenat the release end.
Please help
-
you need a small kid to get in the engine bay and put screw driver in gap in lock and push, 6-8 years old, :y ;D
-
i had same problem a few weeks back and had to fit a new complete cable. At the release handle (inside car) I used a pair of pliers to grab the steel inner wire and pulled really hard and the bonnet lock released ok. Hopefullly this will work.
Fitting a new cable is not too bad even with air cond fitted I did not need to remove any fans at front to aid the fitting...I just removed grill and a bit of patience reaching up and along to refit cable end pin onto lock mechanism.
There is a guide to the cable adjustment in the Maintenance Index.
Good luck :y