Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Damien (Danio) on 09 March 2010, 22:17:29

Title: Some fault codes on my V6
Post by: Damien (Danio) on 09 March 2010, 22:17:29

Hi Today I've done paperclip test and I have following codes:
12 -   Could not find that code
21 -   Throttle Position Sensor (TPS) Voltage High
144 -  Immobiliser No Signal
145 -  Immobiliser Wrong Signal

Should I be worried about them??
Cheers

Title: Re: Some fault codes on my V6
Post by: Entwood on 09 March 2010, 22:22:41

12 is the start of the sequence, so is of no relevance.

21 - odd .. high voltage seems a bit weird ... :(

144/145 usually means the engine won't start !! the EML will flash continually whilst cranking but it will not start as the immobilsor stops fuel.. !!!

Are these current faults .. ie EML light on ... or stored faults ?? ie .. EML is off and you just wanted to check ??

If stored they are "historical" and probably not important ... :)

Title: Re: Some fault codes on my V6
Post by: Damien (Danio) on 10 March 2010, 21:47:13

I think its been stored on memory. I have no problem with the car at all. No EML flashing, and the car starts first time.

So how to clear them faults can anyone tell me, please??

Cheers

Title: Re: Some fault codes on my V6
Post by: Entwood on 10 March 2010, 21:48:27

You need a code reader to clear them fully, no way of "frigging" it I'm afraid ..

If the EML light is out I'd not worry about them . :)

Title: Re: Some fault codes on my V6
Post by: Andy H on 10 March 2010, 22:16:09

Quote

21 - odd .. high voltage seems a bit weird ... Sad

Faulty alternator regulators can (and do) fry the cars electrics so it is worth checking that the voltage is OK.

5 minutes with a multimeter could save a lot of trouble later if the voltage is too high. :y

Title: Re: Some fault codes on my V6
Post by: Damien (Danio) on 11 March 2010, 20:36:06

Thanks Andy will check that on Monday unfortunately. I'm at work now till late.

Does anyone live close to my with a code reader so I can clear them faults?? I'm on WN8