Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mr ICE man on 13 March 2010, 16:18:32
-
sorry for terrible dicription!!
while under the car today i noticed that there was a fuel leak its coming from a small silver box which has 4 bolts or something of that nature i cant really see as its not easily visable has any one got an idea how to fix?can it just be tightend or need a replacement?i think by feel they are torqe bits but not sure it a 2.5 td
cheers all! :y
-
under the car? or do you mean the top of the injector pump?
cant think of anything else that would fit the description?
-
Sorry yes top of engine rh side has 4 bolts or torque screws on it looks to be on the pump yeh should I tighten them or wil they thread?
-
Sorry yes top of engine rh side has 4 bolts or torque screws on it looks to be on the pump yeh should I tighten them or wil they thread?
-
Had a quick look and looks to be the pump what's leaking is on the side of the pump I can't see if they are nuts or not
-
thought so, before touching it check the egr vacuum connection on the inlet manifold above the pump this often leaks onto the injector pump and looks like a leak fom the pump!! :y
edit think the 4 bolts one at least is a security bolt which requires a particular tool to fit
-
Not the egr leaking as I can see it comin from the pump what are they?bolt or something else and where do I get the tool if it is security?
-
Not the egr leaking as I can see it comin from the pump what are they?bolt or something else and where do I get the tool if it is security?[/quote
i didnt tell you this but if your careful you can tap a small socket on it to tighten it, but i take no responsibility if you damage it!!!
-
Cheers mate will have a play Tom.
-
Not the egr leaking as I can see it comin from the pump what are they?bolt or something else and where do I get the tool if it is security?[/quote
nt tell you this but if your careful you can tap a small socket on it to tighten it, but i take no responsibility if you damage it!!!i did
same here if i mind wright it 7mm socket needed ::)
DON'T HIT IT TO HARD i replaced mine with a normal bolt.
also check the dome bit at the back of this bit it has a wire attached it might be loose. :y