Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Mark S on 15 March 2010, 14:17:47
-
Hi all,
Has anyone found out if headlamp washer jets from another vehicle will fit a pre-facelift Omega Elite? (There were some on Ebay for a Ford Focus that looked a possibility). New ones for the Omega are expensive to buy new and difficult to source 2nd hand. Maybe I should consider a different solution entirely? I am fed up buying replacements!
Many thanks for any input.
Mark S.
-
your going to need Omega ones, they are a bespoke design. Try scrappies or breakers here
-
Seem to remember reading somewhere some BMW ones will fit - not sure where or even if true :-/
I've always done what Tunnie suggests or looked on fleabay.
-
Seem to remember reading somewhere some BMW ones will fit - not sure where or even if true :-/
I've always done what Tunnie suggests or looked on fleabay.
Yey, I remember that aswel. There where some pictures from one of our European members about who sais it was a fairly common conversion. E39 model rings a bell.
-
Thanks for the suggestions folks - Curiously I was looking at BMW X3 or X5, they looked to be a possibility, but I'll check out the e39 advice as well.
-
I dont think the Focus ones will fit. Our other car is a Focus with Xenons so I'll have a look later ..........
-
BMW E39 ones mounted on the bumper....
-
BMW E39 ones mounted on the bumper....
Not wishing to cause offence but from memory I thought they where mounted in the panel beneath the headlight.