Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tunnie on 24 March 2010, 11:43:46

Title: 2.2 cam cover bolt size
Post by: tunnie on 24 March 2010, 11:43:46
Anyone know what M size these bolts are? Think i need to get a couple of slightly longer than normal ones so i can mount the injector rail for LPG. I would like to mount it else ware but bit stuck for ideas  :-/
Title: Re: 2.2 cam cover bolt size
Post by: Andy B on 24 March 2010, 11:45:40
Just measure the outer diameter of the thread. That'll then be your 'M size' I'd guess it was M6 ie 6 mm OD  ;)
Title: Re: 2.2 cam cover bolt size
Post by: tunnie on 24 March 2010, 11:58:30
Quote
Just measure the outer diameter of the thread. That'll then be your 'M size' I'd guess it was M6 ie 6 mm OD  ;)

I never actually made that connection until just now  :-[  ;D ;D

I'll pop one out and take a look, just hope they don't weap being taken out and put back in again
Title: Re: 2.2 cam cover bolt size
Post by: Andy B on 24 March 2010, 12:00:01
Quote
....
I never actually made that connection until just now  :-[  ;D ;D  ....

YOu're always learning ......  :y  :y
Title: Re: 2.2 cam cover bolt size
Post by: tunnie on 24 March 2010, 12:02:39
Quote
Quote
....
I never actually made that connection until just now  :-[  ;D ;D  ....

YOu're always learning ......  :y  :y

Indeed, coming few days on LPG going to learn a lot i think  :y