Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Kaycee on 24 March 2010, 12:06:47

Title: Changing Aux Belt
Post by: Kaycee on 24 March 2010, 12:06:47
I am getting a rattle from the belt tensioner from cold after a few minutes its ok but on checking the belt it says its a 6spk2020 but its a pattern belt it was changed at my last service in oct last year the mechanic says its a direct replacement and before i could see the tensioner moving slightly back and forth taking up if you know wat i mean but this is very tight i noticed on another thread it should be a 6spk2030 and is there a diagram for the belt run as sods law will say ive got it wrong
TIA
Robert
Title: Re: Changing Aux Belt
Post by: RobG on 24 March 2010, 12:38:19
Here you go Rob.
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/V6AuxBeltRoute.jpg)
Title: Re: Changing Aux Belt
Post by: JasonH on 24 March 2010, 17:37:50
I bought a genuine belt from the dealer and it was extremely tight - but it went on - just.
Title: Re: Changing Aux Belt
Post by: Andy B on 24 March 2010, 17:41:16
Quote
I bought a genuine belt from the dealer and it was extremely tight - but it went on - just.

Like wise. I had to put it on the plain water pump pulley last, there was no way at it was going over the lip of any other pullies.
Title: Re: Changing Aux Belt
Post by: Darth Loo-knee on 24 March 2010, 17:42:26
Quote
Quote
I bought a genuine belt from the dealer and it was extremely tight - but it went on - just.

Like wise. I had to put it on the plain water pump pulley last, there was no way at it was going over the lip of any other pullies.

Think they are all like that :y
Eh Andy how many AndyB/b's is there??  ::)
Title: Re: Changing Aux Belt
Post by: Andy B on 24 March 2010, 17:44:39
Quote
...
Eh Andy how many AndyB/b's is there??  ::)

At least a couple!  :-?
But I was the first!  :y  :y  ;)
Title: Re: Changing Aux Belt
Post by: Kaycee on 24 March 2010, 17:46:22
Thanks for all replys Gents it looks maybe that its the tensioner thats failing
Thanks for Diagram Rob

Robert
Title: Re: Changing Aux Belt
Post by: Andyb on 24 March 2010, 18:26:52
Quote
Quote
...
Eh Andy how many AndyB/b's is there??  ::)

At least a couple!  :-?
But I was the first!  :y  :y  ;)


yep there is me 2 lol
 :-*