Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: idc62 on 23 March 2010, 19:12:16

Title: help got 0334 code
Post by: idc62 on 23 March 2010, 19:12:16

car started fine this morning but stalled pulling out of drive turned engine over 3/4 times strarted but eml on left it at home.what is0334 which igot with paperclip test in thanks in anticipation of help 2.0 16v auto 98

Title: Re: help got 0334 code
Post by: PhilRich on 23 March 2010, 19:17:09

I can't find any reference to 0334 mate, are you sure you read the code properly? 0335 would be a problem with the crank sensor, 0340 is the cam sensor HTH :-?

Title: Re: help got 0334 code
Post by: Entwood on 23 March 2010, 19:18:24

Are you certain of the code ???

this page, 2.0 - Simtec 56 2.0l Fault Codes,  doesn't list a 0334

http://www.omegaowners.com/forum/YaBB.pl?num=1206569945

but an 0335 would explain the symptoms.

this page, 2.0 - Simtec 56.0/56.1 2.0l 16V Fault Codes, gives 2 digit codes

http://www.omegaowners.com/forum/YaBB.pl?num=1207565476

:(

Title: Re: help got 0334 code
Post by: idc62 on 23 March 2010, 19:19:24

will redo clip test back in a mo

Title: Re: help got 0334 code
Post by: idc62 on 23 March 2010, 19:26:45

oops 0335 its been a long day

Title: Re: help got 0334 code
Post by: Entwood on 23 March 2010, 19:29:35

P0335      Incorrect RPM Signal

Camsensor I believe ..  :)

This is for the 2.2 .. but I believe the 2.0 is similar .. :)

http://www.omegaowners.com/forum/YaBB.pl?num=1269023974

Title: Re: help got 0334 code
Post by: idc62 on 23 March 2010, 19:46:20

thats at the front/top of cylinder head under black cover isn't it??

Title: Re: help got 0334 code
Post by: PhilRich on 23 March 2010, 19:51:50

Yes mate, that's it. :y Have a look in the Maintenance Section, it's the first howto you come to ;)

Title: Re: help got 0334 code
Post by: idc62 on 23 March 2010, 20:05:53

thanks philrich is this best to be bought from vauxhall or is there another supplier

Title: Re: help got 0334 code
Post by: dad1uk on 23 March 2010, 20:09:41

Be warned - I seem to remember that this item has been upgraded and there is a modification to the wiring......

It's just something lying far back in the grey matter, so it may be a load of rubbish!

Title: Re: help got 0334 code
Post by: idc62 on 23 March 2010, 20:18:36

i had a 2.0 cav ecotec and a mod was done to wireing to stop it " spiking out " and affecting cam sensor by a local vauxhall place but they arn't there any more

Title: Re: help got 0334 code
Post by: RobG on 23 March 2010, 22:40:00

Quote

P0335      Incorrect RPM Signal

Camsensor I believe ..  :)

This is for the 2.2 .. but I believe the 2.0 is similar .. :)

http://www.omegaowners.com/forum/YaBB.pl?num=1269023974

Been here before Nige http://www.omegaowners.com/forum/YaBB.pl?num=1269356604  Crank sensor

Title: Re: help got 0334 code
Post by: Entwood on 23 March 2010, 22:46:16

Quote

Quote

P0335      Incorrect RPM Signal

Camsensor I believe ..  :)

This is for the 2.2 .. but I believe the 2.0 is similar .. :)

http://www.omegaowners.com/forum/YaBB.pl?num=1269023974

Been here before Nige http://www.omegaowners.com/forum/YaBB.pl?num=1269356604  Crank sensor

Sod it .. I'm going to stop trying to help on the 2/3 size engine ... :(

if they ain't got the right number of cylinders ....  :-/ :-/ :-/ :-/

Title: Re: help got 0334 code
Post by: RobG on 23 March 2010, 22:48:28

Quote

Quote

Quote

P0335      Incorrect RPM Signal

Camsensor I believe ..  :)

This is for the 2.2 .. but I believe the 2.0 is similar .. :)

http://www.omegaowners.com/forum/YaBB.pl?num=1269023974

Been here before Nige http://www.omegaowners.com/forum/YaBB.pl?num=1269356604  Crank sensor

Sod it .. I'm going to stop trying to help on the 2/3 size engine ... :(

if they ain't got the right number of cylinders ....  :-/ :-/ :-/ :-/

;D ;D ;D ;D ;D

Title: Re: help got 0335 code
Post by: idc62 on 25 March 2010, 20:54:47

changed sensor still same problem hard to start idle slightly higher slight miss now and then and same bloody 0335 code not my day is it hope someone can help thanks ian :-? :-?

Title: Re: help got 0334 code
Post by: idc62 on 25 March 2010, 22:24:33

any one got ideas? please

Title: Re: help got 0334 code
Post by: Entwood on 25 March 2010, 22:26:39

Which sensor did you change .. cam sensor or crank sensor ???  :(

Damned 4 pots .. why do they have to be difficult... :(

Title: Re: help got 0334 code
Post by: idc62 on 25 March 2010, 22:41:10

cam sensor dont tell me should of been different one??

Title: Re: help got 0334 code
Post by: Entwood on 25 March 2010, 23:25:29

Posts no 2 & 11 indicate it is the CRANK sensor that gives that fault code ??

Title: Re: help got 0334 code
Post by: idc62 on 26 March 2010, 00:02:36

ce la vie ;D ;D ;D :-? :D :D